Canon imageCLASS MF6540 Reference Manual page 60

Before Using the
Machine 1
Advanced Copy Features
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Collate Copy
■
This feature can be used together with "Two-Sided Copy, " on p. 3-8,
"2 on 1 Combination, " on p. 3-7, "Original Frame Erase, " on p. 3-13
"Book Frame Erase, " on p. 3-13 and "Binding Hole Erase, " on p. 3-14.
1.
Set documents.
Place the first page on the platen glass if you are not using the ADF.
2.
Press [COPY].
If <AUTO COLLATE> is set to <COLLATE> in <STANDARD SETTINGS>
in <COPY SETTINGS>, skip to step 5.
3.
Press [Collate].
<COLLATE> appears in the LCD.
4.
Press [ ] or [ ] to select <ON>, then press
[OK].
5.
Use the numeric keys to enter the desired copy
quantity (1 to 99).
Back Previous
6.
Press [Start].
When the documents are loaded in the ADF, collate copying starts
and no further operation is required.
7.
Place the next page of the document on the
platen glass, then press [Start].
Repeat this step to scan all pages.
8.
Press [OK].
The machine prints the remaining sets of copies.
– To cancel all settings, press [Reset].
– When you switch the mode by pressing the mode keys such as
[FAX], all settings will be also canceled. If you want to keep the
settings, store the settings in <STANDARD SETTINGS> in <COPY
SETTINGS>. (See "STANDARD SETTINGS, " on p. 11-10.)
– When scanning multiple page documents, <MEMORY FULL> may
appear in the LCD and scanning may be canceled. If this happens,
press [Stop] to return to the standby mode, and print, send, or
delete any documents stored in memory.
TOP
Next
3-6