Canon imageCLASS MF6540 Reference Manual page 75

Before Using the
Machine 1
Basic Sending Method
Document and Paper
2
Copying
3
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only) 4
Printing and
Scanning
5
Network (MF6595cx/MF6595/
MF6590/MF6540 Only) 6
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Follow this procedure to send faxes.
1.
Set documents.
Place the first page on the platen glass if you are not using the ADF.
2.
Press [FAX].
The FAX indicator lights up and the machine enters the fax standby
mode.
If you want to adjust the image quality and density, see "Scan
Settings, " on p. 4-5.
3.
Enter the fax number with the numeric keys.
You can also specify the fax number with a one-touch speed dialing
keys, coded speed dialing codes or the [Address Book] key. (See
"Specifying Recipients, " on p. 4-13.)
4.
Press [Start].
When you set the documents on the platen glass, press [
to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start dialing.
] or [ ]
Back Previous Next
TOP
4-4