Step 2 Connecting The Machine To A Network; Step 3 Checking Network Settings - Canon Color imageCLASS 8180c Software Manual

Step 2 Connecting the Machine to a Network

1
Connect a Category 5 rated (Cat 5) twisted-pair LAN cable to the
100Base-TX/10Base-T port on the back of the machine. Connect
the other end of the cable to a network router or a hub.

Step 3 Checking Network Settings

1
Press [Menu] ➞
the LCD ➞ press [Set].
MENU
6.NETWORK SETTINGS
2
Press ➞
NETWORK SETTINGS
2.VIEW IP ADDRESS
3
Press
VIEW IP ADDRESS
1.IP ADDRESS
4
Press [Stop/Reset] to return to the standby display.
or to select <6.NETWORK SETTINGS> on
to select <2.VIEW IP ADDRESS> ➞ press [Set].
or
to select the desired setting ➞ press [Set].
or
Installing Software on Your Computer
1
1-15