Keyestudio 4DOF Manual page 152

www.keyestudio.com
{
while(pos1<jiyi1[k])
the array.
{
myservo1.write(pos1); //servo 1 performs the action
delay(5);
pos1++;
//Serial.println(pos1);
}
}
else //if the current servo 1 angle is greater than the value stored in array 1.
{
while(pos1>jiyi1[k])
the array.
{
myservo1.write(pos1); //servo 1 performs the action
delay(5);
pos1--;
//Serial.println(pos1);
}
}
//***************************************************************
//the explanation is the same as the previous servo.
if(pos2<jiyi2[k])
{
while(pos2<jiyi2[k])
{
myservo2.write(pos2);
delay(5);
//while loop, make servo turn to the position of value stored in
//delay 5ms，controlling the servo rotating speed.
//pos1 plus 1
//while loop, make servo turn to the position of value stored in
//delay 5ms，controlling the servo rotating speed.
//pos1 subtracts 1
149