Setup - Omron V440-F User Manual

4 Setup

4-1 Setup
The Setup view allows you to configure all aspects of the Read Cycle Sequence on the left side of the
user interface: Autocalibration, Cycle, Acquire, Matrix Mode, Decode, Match String, Format
Output, Outputs, and Favorites.
Clicking the flash icon at the upper right saves current settings to the reader's flash memory so the
settings will be available when the reader is rebooted.
The question mark icon at the upper right opens WebLink Help.
The gear icon at the upper right brings up the Application Settings menu.
Note: The 1, 2, and 3 output indicators at the lower right of the screen display the results of the last
read cycle.
The gear icon at the upper right brings up the Application Settings menu. This menu includes several
functions: Save, New, Load, Advanced, Language, Terminal, Beeper, Image Storage, Reset
Application or Factory Settings, Activate Account Management, and About WebLink.
4-2
V440-F C-Mount Code Reader User Manual