Omron V440-F User Manual page 464

N-8-5 Minimum Same-Column Symbol Overlap Width Percentage
Allows you to determine the minimum percentage of overlap at which two symbols are
Definition:
considered to be in the same column.
Serial Cmd: <K748,sort output,row direction,column direction,minimum same-row symbol overlap
height percentage,minimum same-column symbol overlap width percentage>
Default: 20
Any number from 0 to 100 (0 = 0% and 100 = 100%)
Options:
Example:
N-8-6 Output Sorting Examples
The following examples demonstrate label setup functionality.
Note: "NR" = No Read – not output with symbol data.
A B
D NR1
NR2 H
K
Case 1: Sort = By Row
Row Direction = Left to Right
Column Direction = Top to Bottom
Expected Output: (Decoder Separator = ",")
A,B,C,D,NR1,F,NR2,H,I,J,K
Case 2: Sort = By Row
Row Direction = Right to Left
Column Direction = Top to Bottom
Expected Output: (Decoder Separator = ",")
C,B,A,F,NR1,D,J,I,H,NR2,K
(Continued on next page.)
V440-F C-Mount Code Reader User Manual
Symbol A is part of C2 if Minimum Same-Column Symbol
Overlap Width Percentage is set to 20.
C
F
I J
Case 5: Sort = By Column
Row Direction = Left to Right
Column Direction = Top to Bottom
Expected Output: (Decoder Separator = ",")
A,D,NR2,B,NR1,H,K,C,F,I,J
Case 6: Sort = By Column
Row Direction = Left to Right
Column Direction = Bottom to Top
Expected Output: (Decoder Separator = ",")
NR2,D,A,K,H,NR1,B,I,F,C,J
Appendices
N
N-11