Omron V440-F User Manual page 380

Speed (Lossy)
Images will be saved when possible. Some images may be dropped.
SOR = Start of Read Cycle
EOR = End of Read Cycle
Accuracy (Lossless)
Every image in read cycle is transferred. The read cycle may be delayed due to image saving since
each transfer will need to be finished before the end of the read cycle.
SOR = Start of Read Cycle
EOR = End of Read Cycle
H-22-4 RAM Drive Size in MB
Definition:
Serial Cmd:
Default:
Options:
• Note: The number of images that can be save in the RAM drive vary depending on model, RAM drive size setting,
image file format.
The following is a list of the number of images to be saved when the Image File Format is PNG and,
the Image Scale is Full.
Resolution
0.3 Mpix
1.2 Mpix
5 Mpix
V440-F C-Mount Code Reader User Manual
This defines the maximum RAM Drive size on the system. It is also limited to
the memory available on the system and affects the max. rapid image count in
<K241> since the onboard memory may be taken up by the RAM Drive.
Images may not be saved if the RAM Drive is not large enough to store all the
images in the current read cycle and if Image Storage Location is set to FTP
with Image Save Mode set to Speed. If Image Storage Location is set to FTP
with Image Save Mode set to Accuracy, all images in the read cycle will be
transferred to the FTP host but the read cycle may be delayed.
<K764,image storage location,FTP host info,transfer optimization,RAM
drive size in MB,save image until,action at image storage limit>
20
1 to 50
No. of images to be saved
default: 20MB
57
16
4
Max.: 50MB
143
42
10
Appendices
H
H-45