Omron V440-F User Manual page 118

Example 3 – Using the Configuration Database with UID and Matrix Mode under conditions of widely
varying tray orientation and symbol quality.
Problem:
1
Read the label on the well plate in either of two orientations.
2
Read all the codes in the matrix. Do this over 3 images, varying lighting and image enhancements
to make sure all codes are read.
3
Output the data in the order of well plate label followed by matrix data.
Solution Steps:
1
Set up Cycle to read 97 codes (96 from the well plate and 1 from the label). Set number of
images to 3.
2
Insert 1 image.
3
Insert the first entry and change it to UID 1. Put ROI around label in left hand orientation.
4
Insert the second entry and change it to UID 1 as well. Put an ROI around the label in the
right-hand orientation.
5
Insert the third entry and change it to Matrix.
6
Insert second and third image, insert entry into each, and change it to Matrix.
V440-F C-Mount Code Reader User Manual
4 Setup
4
4-55