Omron V440-F User Manual page 124

4 Setup
In the example below, the current settings were saved to the 6th index. The flash icon will continue to
appear green until another database is saved.
Example:
4
Suppose you want to switch from database index 1 to database index 3. You can click the radio button
to the left of database index 3 to switch to that database index. However, since database index 1 is still
not saved, you will see the following dialog:
If you want to switch from database index 1 to database index 3 without saving database index 1
settings, click CONTINUE. If you want to save database index 1 settings and then switch to database
index 3, click SAVE AND CONTINUE. You can also click the X at the upper-right of the dialog to remain
at index 1.
If you click the Run view tab in WebLink's Navigation Bar before the current database is saved, you
will see a dialog similar to the one below asking if you want to save the current index you were
configuring. If you want to switch from your current database index to the Run view without saving
current database index settings, click CONTINUE. If you want to save your current database index
settings and then switch to the Run view, click SAVE AND CONTINUE. You can also click the X at the
upper-right of the dialog to remain at the current database index.
4-61
V440-F C-Mount Code Reader User Manual