Omron V440-F User Manual page 132

The five most important areas in the Daisy Chain creation interface are:
• Group Information: Contains the Group Name, Total Count, Parent Count, and Children Count
of the Daisy Chain being created. This information is dynamically updated as you make changes.
The Group Name text box is editable, and a group name must be provided to create a new Daisy
Chain.
• All Devices: Contains all Daisy Chain-enabled devices that appear on the network. Devices are
represented by an image, a model, and an IP address. Each device is clickable. You can search
for specific devices using the Filter Devices search box.
• Parent: The Parent container is empty upon opening the interface. This container is used to store
the Parent reader in the Daisy Chain. A maximum of one device can be placed in the Parent con-
tainer. A minimum of one device must be placed here to create the Daisy Chain.
• Children: The Children container is empty upon opening the interface. This container is used to
store the Children readers in the Daisy Chain. A minimum of one device must be placed here to
create a Daisy Chain, and a maximum of seven devices may be placed here.
• Buttons: This section of the interface includes the Create, Clear, and Exit buttons.
• Create creates a new Daisy Chain if all the necessary conditions are met.
Note: The Create function does not delete a Daisy Chain and only resets the interface.
• Clear resets the interface to its original state.
• Exit closes the window.
Below these buttons, messages will appear that indicate any errors in the potential Daisy Chain being
created. These errors appear and disappear based on dynamic validation of user input.
V440-F C-Mount Code Reader User Manual
4 Setup
4
4-69