Advertisement
Quick Links
Handheld 2D Code Reader
V400-H Series
Target, Touch & Go
The V400-H combines highest reading performance and
ease of operation for mobile applications. The built-in
LCD monitor helps to target the right position for V400-H
in order to read the code and to display the measurement
result immediately. Thanks to the excellent reading per-
formance, direct marked or strongly degraded codes can
be identified. The read 2D code can be stored on SD card
or exported to a PC for further processing. The V400-H
supports the traceability of components in assembly
lines, were fixed readers do not fit.
• Easy to use - Target, Touch & Go
• Build-in LCD monitor for immediate display of results
• Accurate - reading of direct print marks
• Variable field of view
Examples of Typical Applications
2D Codes on Metallic Parts
Camshaft
2D Codes on Printed
Circuit Boards
C400
Application
Cylinder head, cylinder block
2D Codes on LCD Glass
Panels
Connecting rods
Crankshaft
2D Codes on Electronic
Components
(Crystal oscillators, ICs)
A-1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Omron V400-H
Summary of Contents for Omron V400-H
- Page 1 Thanks to the excellent reading per- formance, direct marked or strongly degraded codes can be identified. The read 2D code can be stored on SD card or exported to a PC for further processing. The V400-H supports the traceability of components in assembly lines, were fixed readers do not fit.
- Page 2 System Configuration The Code Reader can be connected with other equipment via RS232C. V400-W20-2M SYSMAC Series Power Supply (Recommended Power Supply: OMRON Model S8VS-01505) V400-W21-2M Personal computer (Connect to RS-232C port.) Power Supply V400-H111 (Recommended Power Supply: OMRON Model S8VS-01505)
- Page 3 1.0 A max. Serial interface RS-232C Data Matrix, ECC200, 10 × 10 to 64 × 64, 8 × 18 to 16 × 48, QR Code (Models 1, 2), Applicable codes 21 × 21 to 57 × 57 (Versions 1 to 10)
- Page 4 Contactor V400-AC2 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. Q146-E2-01-X In the interest of product improvement, specifications are subject to change without notice.
Need help?
Do you have a question about the V400-H and is the answer not in the manual?
Questions and answers