Omron V440-F User Manual page 473

Appendices
O-1 Introduction
This section describes how to update V440-F firmware.
You can update the following V440-F firmware versions by following the steps described.
• Firmware
• WebLink
V440-F firmware version example:
Type
Firmware
WebLink
O-1-1 Precautions
• The Device Discovery Utility (DDU) is required to update V440-F firmware.
• When you update the firmware version, the settings saved on the V440-F will be initialized. Be sure
to connect to WebLink and back up the setting file before updating.
• Do not turn off the V440-F during the update.
• Be careful not to disconnect the cable that connects the V440-F to your computer during the update.
• The updated firmware cannot be downgraded.
If you accidentally apply old firmware, you may not be able to connect to the V440-F. Be sure not to
apply an older firmware version.
O-2
Version
3.0.0
3.0.0
V440-F C-Mount Code Reader User Manual