Throttle; Operator Seat; Two Speed - Terex DTM 00101 (standard) Operation And Maintenance Manual

4.3 Throttle

The throttle (foot pedal) is located beneath the operator's right foot when seated
in the machine. The throttle controls engine rpm.
• Press the front of the pedal down to increase engine RPM.
• Press the rear of the pedal down to decrease engine RPM.
• Select a lower rpm for work that requires delicate operation of
the machine.
• Select a higher rpm for faster travel speed or when more
power or flow is required for a task.

4.4 Operator Seat

Seat Adjustment
the PT-100G is available with a
suspension style seat adjustable
for both operator weight (spring
pre-load) and operator height
variation in fore and aft direc-
tions.
To adjust for weight:
Twist the knob clockwise for
heavier operator or counter-
clockwise for lighter operator.
To adjust for height:
Pull outward on the height
adjustment lever, slide the seat forward or rearward as needed, then release the
lever to set
.

4.5 Two Speed

The PT-100G is equipped with a two-speed drive system. Low range is best suit-
ed to performing strenuous work or operating attachments. High range is intend-
ed mainly for transporting.
To shift between high and low ranges, push the button on the front of the left
joystick. When shifting between ranges, slow the machine to ensure a smooth
transition. The high range indicator (item 9, section 4.1) illuminates to confirm
high range operation.
Note: If the machine is turned off, the lap bar is raised, or the operator exits the
seat, the machine automatically returns to low range.
4 MACHINE DESCRIPTION / CONTROLS
weight
43
height