Throttle; Operator Seat; Two Speed - Terex TSV-70 Operation And Maintenance Manual

4.4 Throttle

The throttle (foot pedal) is located beneath the operator's right foot when seated
in the machine. The throttle controls engine rpm.
• Press the front of the pedal down to increase engine RPM.
• Press the rear of the pedal down to decrease engine RPM.
• Select a lower rpm for work that requires delicate operation of
the machine.
• Select a higher rpm for faster travel speed or when more
power or flow is required for a task.

4.5 Operator Seat

Seat Adjustment
The TSV-70 and 80 machines
are available with a suspension
style seat adjustable for both
operator weight (spring pre-
load) and operator height varia-
tion in fore and aft directions.
To adjust for weight:
Twist the knob clockwise for
heavier operator or counter-
clockwise for lighter operator.
To adjust for height:
Pull outward on the height adjustment lever, slide the seat forward or rearward as
needed, then release the lever to set
4.6 Two Speed (optional)
Some TSV machines are equipped with a two-speed drive system. Low range is
best suited to performing strenuous work or operating attachments. High range is
intended mainly for transporting.
To shift between high and low ranges, push the button on the front of the left joy-
stick. When shifting between ranges, slow the machine to ensure a smooth tran-
sition. The high range indicator (item 15, section 4.1) illuminates to confirm high
range operation.
Note: If the machine is turned off, the lap bar is raised, or the operator exits the
seat, the machine automatically returns to low range.
4 MACHINE DESCRIPTION / CONTROLS
weight
.
43
height