4.9
5880 LED I/O Module
The 5880 is an LED driver board that can be used in a wide variety of applications, including
as an interface with most customized floor plan annunciator boards. The 5880 can drive up to
40 LEDs and has one PZT controller. The 5880 also has eight inputs for dry contact
monitoring. The following sub-sections describe hardware installation. Refer to Section 6 for
programming information.
4.9.1
5880 Board Layout
Figure 4-23 is a picture of the 5880 board showing locations of screw terminals for connection
to the panel and contact monitor wiring; pin connectors for connecting LEDs; and the DIP
switch for selecting an SBUS ID number.
151430
Dry Contact Inputs
SBUS Connection
Figure 4-23 5880 Board Layout
firealarmresources.com
Control Panel Installation
SBUS Address
DIP Switch
4-23