Using Both Repeaters And Direct Connect Wiring On A Networked System - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

5.5 Using Both Repeaters and Direct Connect
Wiring on a Networked System
Figure 5-10 below shows a network wiring example using both repeaters and direct connect
wiring. All repeaters in the system must be placed only on panels that are at the ends of a
direct connect BUS or connected to panels with no direct connect network wiring.
Figure 5-10 Network Wiring Example using both Repeaters and Direct Connect Wiring
151430
firealarmresources.com
Networking
Class A
Wiring
5-11