Mapping Led Points - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

Programming Overview
8.2.4

Mapping LED Points

Figure 8-7 is a simple example showing how LED points are mapped to zones and output
groups. Typically you would create two output groups for each zone, one for alarms and one
for troubles. (LED points are available when models 5865-3/4 and/or 5880 are used with the
system.)
Figure 8-7 Example of LED Points Mapped to Output Groups
(applies to Models 5865-3/4 and 5880)
151430 8-11
firealarmresources.com