5. A screen similar to those shown in Figure 10-3 will display.
Figure 10-3 Checking Detector Sensitivity Compliance
You can print detector status by uploading the detector status to and printing from SKSS-2.
10.4.12 View Status of a Point
1. From the Main Menu, select
2. From the list that displays, press
The screen that displays will show you if the point has a trouble and will provide sensitiv-
ity compliance information. (See Section 10.4.11 for complete information about detector
sensitivity compliance.)
10.4.13 View Alarms or Troubles
When the system is in alarm or trouble, you can press
trouble. See Section 10.4.13 for more information.
10.4.14 View System Information
Press
from the Main Menu to view the panel model and serial number and system version
8
number and date. The information displays for several seconds then returns to the main menu.
151430
for Point Status.
2
to select the module where this point is located.
firealarmresources.com
System Operation
to view the location of an alarm or
10-9