Dry Contact Wiring - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

IFP-2000 Installation Manual
4.9.4

Dry Contact Wiring

The 8 input circuits on the 5880 board are for monitoring switch inputs-any type of switch
supported by the control panel can be used with the 5880. For example, you can use a 5880 to
monitor pull stations, water flow, tamper, reset, or silence switches.
Wire dry contacts as shown in Figure 4-26. Notice grouping of terminals; power terminals are
shared by two inputs.
4-26
Figure 4-26 Dry Contact Wiring
firealarmresources.com
Supervised
Model 7628
151430