IFP-2000 Installation Manual
example.
8.4.1.2 Selecting Options and Entering Data
There are several ways to make programming selections using the control panel depending on
which screen you are currently using. The chart below is a generic explanation.
To
Select from a menu.
Enter numeric data.
Enter text (alphanumeric data).
Select from a scrolling list.
8-14
Figure 8-9 Moving through Main Menu
(Main Menu used as an Example)
Enter the number of the option.
Press the appropriate number on the annunciator.
Enter each letter individually by pressing and holding any numeric key until the one
you wish to select displays. Then press
Section 8.4 for complete information.
Use
(up arrow) and
(down arrow) to move through a list of available
options. When the option you want to select is displayed, press
firealarmresources.com
Press
(right arrow) to select the letter. See
.
151430