Event History; Built-In Troubleshooting And Testing Tools; Slc Device Locator - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

12.2.2 Event History

The event history can be useful for tracking or recalling a trouble condition.

12.3 Built-in Troubleshooting and Testing Tools

The fire control panel has several built-in testing and troubleshooting tools that can be utilized
to save time while testing and troubleshooting points and SLC devices.

12.3.1 SLC Device Locator

SLC device locator can be used to locate a device on a SLC loop.
Follow these steps to locate a particular SLC device:
1. Select (Point Functions) from the Main Menu.
2
2. Select (SLC Single Device Locator).
4
A message similar to the one shown in Figure 12-1 will display.
3. Press the or
If NO is chosen you will exit back to the Point Function menu.
If Yes is chosen the system will cease normal operation leaving the premise unprotected.
4. Select the SLC loop.
5. Enter the SLC address of the device you wish to locate.
The LED on the selected device will start flashing.
6. Press any key to exit SLC device locator function.
Note: Once you exit the system will resume normal operation.
151430
Figure 12-1 Shut Down Warning
arrow to toggle NO to YES then press
firealarmresources.com
Testing and Troubleshooting
.
12-3