Ra-2000 Remote Annunciator Installation - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

4.6

RA-2000 Remote Annunciator Installation

The optional Model RA-2000 Remote Annunciator, shown in Figure 4-11, performs the same
functions as the on-board annunciator. Operation is identical. The RA-2000 can be surface or
flush mounted.
Figure 4-11 Model RA-2000 Remote Annunciator, Front View
RA-2000 installation involves the following steps:
1. Make sure power is off at the panel.
2. Mount the RA-2000 in the desired location (see Section 4.6.1).
3. Connect the RA-2000 to the panel (see Section 4.4).
4. Use the DIP switches on the back of the RA-2000 to assign an SBUS ID# to the RA-2000
(see Section 4.5.1).
5. The RA-2000 module must be added to the system through programming. JumpStart
AutoProgramming will add the module automatically (see Section 8.1.3). You can also
add it manually (see Section 9.2.2). Select a name, if desired (see Section 9.2.1.1).
151430
firealarmresources.com
Control Panel Installation
4-13