Model Ra-2000 Connection To The Panel - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

6. After the annunciator wiring to the panel has been completed (described in Section 4.6.2),
replace the electronic assembly in the back box. Place the bezel over the back box and
tighten the set screws on the bezel.
4.6.2

Model RA-2000 Connection to the Panel

Connect the RA-2000 to the panel as shown in Figure 4-17
Figure 4-17 Model RA-2000 Connection to the Panel
151430
firealarmresources.com
Control Panel Installation
4-17