About This Manual; Terms Used In This Manual - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

1.2

About this Manual

This manual is intended to be a complete reference for all installation and operation tasks for
the IFP-2000 and RPS-2000. Please let us know if the manual does not meet your needs in any
way. We value your feedback!
1.2.1

Terms Used in this Manual

The following terminology is used with the above mentioned control panels:
Term
SLC
Module
Input Point
Input Zone
Output Point
(or Output Circuit)
Group (or "Output Group")
Mapping
Networking
151430
Table 1-1 Manual Terminology
Signaling line circuit
The term module is used for all hardware devices except for SLC
addressable devices and notification appliances. This includes the IFP-
2000/RPS-2000 panels itself and the built-in power supply. It also refers to
any (optional) 5815XL SLC expansion modules.
An addressable sensing device, such as a smoke or heat detector or a contact
monitor device.
A protected area made up of input points.
A notification point or circuit for notification appliances. Relay circuits and
auxiliary power circuits are also considered output points.
A group of output points. Operating characteristics are common to all
output points in the group.
Mapping is the process of specifying which outputs are activated when
certain events occur in the system. Section 8.2 explains mapping in detail.
Up to 8 panels can be networked to sites that act like one panel.
firealarmresources.com
Description
Introduction
1-3