Sale (Swiping A Card) - Ingenico iCT200 Series User Manual

1. Your terminal may be configured to allow Cashback, if
so press the GREEN button to select this option.
2. Now enter the Cashback amount and press the
GREEN button. If Cashback is not required, press the
YELLOW button and continue from step 4 below. If
Cashback is not configured, continue from step 3 below.
3. Hand the terminal to the customer. The customer
should enter their PIN, as they do so asterisks will
appear on the screen. Now press the GREEN button.
4. If numbers are entered incorrectly during this process
use the YELLOW button to delete and then re-key.
PLEASE NOTE: Removing the card will VOID the
transaction.
5. The terminal will now print a receipt which the
CUSTOMER must retain for their records.
Tear off the receipt and press the GREEN button to
continue. Should you require a reprint of the receipt press
the MENU button.
6. You will now be prompted to remove the customer's
card. The terminal will then print a MERCHANT receipt
which must be kept for your records.
7. Press the GREEN button and the terminal will return to
the READY prompt.
PLEASE NOTE: The card number will be masked on the
customer's receipt.
8.

Sale (Swiping a Card)

1. Swipe the customer's card through the terminal.
2. You may be prompted to confirm the last four digits of
the card number. Key in the last four numbers from the
customer's card and then press the GREEN button.
3. The terminal will check the card.
SALE
Cashback?
Enter=YES
PWCB
Key in Cash Amount
and then press ENTER
Amount
PIN ****
Cardholder to key PIN
Enter=OK Clear=REKEY
Amount
PIN: ACCEPTED
RETURN TERMINAL
Do NOT Remove Card
Printing
CUSTOMER RECEIPT
Please Wait...
Tear OFF
CUSTOMER RECEIPT
Press ENTER if OK
Press MENU to Reprint
SALE
Please Remove Card
Printing
MERCHANT RECEIPT
Please Wait...
Tear OFF
MERCHANT RECEIPT
Press ENTER if OK
Press MENU to Reprint
SALE
Checking Card
Please Wait...
Key in last 4 digits of Card
Number
and then press ENTER
Clear=NO
0.00
55.00
55.00
Page 11