Ingenico iCT200 Series Installation Manual

Ingenico iCT200 Series Installation Guide
IMPORTANT INFORMATION EMV CHIP CARD PROCESSING
This device has the ability to process EMV chip cards. If you are set
up to accept EMV chip cards you will notice a few differences when
presented an EMV chip card for payment .
1. EMV chip cards must be inserted into the device or pin pad if
attached (swiped transactions are not allowed).
2. The EMV chip card must remain in the device until the transac-
tion is complete
3. The transaction may require a customer to enter a PIN (similar
to a debit transaction).
4. EMV chip card transactions require the credit card to remain in
the possession of the cardholder at all times.
For more information regarding EMV chip card acceptance and pro-
cessing please visit: www.paymentstart.com/secure
INSTALLATION INSTRUCTIONS
Step 1: Open box
Step 2: Follow installation instructions on page 2
Step 3: Begin processing
Ingenico NA online help
videos can be found on
DOCUMENT D'EXECUTION
INGENICO_CMJN.ai
INFORMATIONS GENERALES COULEURS UTILISEES APPROBATION
Client: INGENICO
Date : 10 DEC 2013
YouTube – search for "Out
C 67/M 54
C 0/M 100
J 47/N 43 J 100/ N0
Utilisation: Impression quadri.
Ne pas utiliser pour application
écran.
of the box: iCT200 Series."
Watch the videos online or
from your smartphone.
CONTACT US:
www.paymentstart.com
for user guides and other DIY tips
1-866-451-4007
Activation & Training
for further assistance
8:30 AM – 9:00 PM EST, M-F
Your
Payment Solutions
Team