Ingenico iCT200 Series User Manual page 5

External Cables
DO NOT use any other external cables and/or cable lengths (must be less than 3 metres long)
other than those specified and/or supplied by the manufacturer. Ensure all cables are routed to
prevent damage or accidental contact.
MODEM
General Description
The Terminal has an integral modem that allows the Terminal to transfer transaction data to card
companies host computer systems.
The internal modem supports: CCITT V22bis/V22/V21/V32, V32bis, V34 data transfer protocols.
It has an automatic dialling facility.
Disclaimer
This equipment has been designed for connection to the local Public Switched Telephone Network
(PSTN). The apparatus must not be subjected to any modification, in any material way, unless
authorised by Ingenico. Nor must it be used with Internal Modem Software that has not been
formally accepted by the manufacturer. External control Software or external control equipment
which causes operation of the modem or associated call set-up equipment to contravene the
requirements of the PSTN Network.
Systems to which the Modem may be connected
This Modem is only approved for connection to the following telecommunications systems:
1. The Public Switched Telephone Network (PSTN)
2. Any equivalent service run by any Licensed Telecommunications Network Operator
3. Private Branch Exchange (PBX) extensions, being a Branch Telecommunications System
operating under a license
4. The Modem is not suitable for shared service or 1+1 carrier systems nor as an extension to a
payphone.
PLEASE NOTE: It cannot be guaranteed that the Modem will operate correctly under all possible
conditions of connection to PBX's. Any cases of difficulty should be referred in the first instance to
the Ingenico Helpdesk.
Connection
The modem is connected to the PSTN via a standard plug and flexible cord, which requires a
suitable compatible socket (and adaptor if required). Terminals connected to phone lines where a
broadband service is present must be connected through an ADSL microfilter.
Dialling
This modem is suitable only for connection to direct exchange and/or PBX lines which provide
Dual Tone Multi Frequency (DTMF) dialling facilities.
Ringer Equivalence Number (REN)
To determine the total number of items of apparatus that should be connected simultaneously to
an exclusive PSTN line, the total REN values of each of the items of apparatus connected to the
line should not exceed the maximum REN value 4.0. This value includes any Network
operator provided instrument, each of which is assumed to have a REN value of 1.0 unless
otherwise marked.
Page 4