Verify Account; Mcc6012 Support - Ingenico iCT200 Series User Manual

3. Tear off the receipt and give this to the customer as a copy of the transaction. Press the
GREEN button.The terminal will now print a copy of the receipt for you to retain for your records.
Press the GREEN button and the terminal will return to the READY prompt. If a reprint is required
press the MENU button.

23. Verify Account

Press the MENU button and then use the
highlight the transaction type from the transaction menu
and then Press ENTER.
1. Insert or Swipe Card.
2. Cardholder PIN entry ( * (asterisk) will be displayed as
each PIN digit is keyed in).
3. The terminal will contact the acquirer to verify the
account holder.
PLEASE NOTE: If the terminal cannot connect to the
acquirer it will print 'Connection Failed'.

24. MCC6012 Support

Merchants classed as Financial Institutions (identified by having a Merchant Category Code of
6012) can now capture additional data when performing certain types of transactions (currently
applies to Sale transactions using Visa cards).
When enabled (via Ingenico's GEMS system) the following new prompts will appear when
performing transactions where this feature is enabled:
Date of Birth (YYYYMMDD) - Numeric
Surname (First 6 characters) - AlphaNumeric
Card Number of Account (First 6 and Last 4 digits) -
AlphaNumeric
Post Code (up to 10 characters) - AlphaNumeric
Page 24
keys to
VERIFY ACCOUNT
Insert or Swipe Card
to continue
( or press Cancel key )
Amount
PIN: ****
Cardholder to key PIN
Enter=OK Clear=REKEY
Amount
PIN ACCEPTED
RETURN TERMINAL
DO NOT Remove Card
SALE
Key in birth YYYYMMDD
and then press ENTER
SALE
Key in surname
and then press ENTER
SALE
Key PAN (First 6 Last 4)
and then press ENTER
SALE
Key in post code
and then press ENTER
TRANSACTION MENU
Verify Account
Pre-Auth
Refund
£0.00
£0.00