Ingenico iCT200 Series User Manual page 32

1. At the READY prompt press the MENU button until the
System Menu is displayed.
2. Using the key to highlight the Select Function
option and then press the GREEN button.
3. Enter the number 40 and then press the GREEN
button.
4. Swipe the Supervisor Card or enter your Supervisor
code.
5. If you want to proceed to the Waiter Setup menu,press
the GREEN button. If not, press the YELLOW button to
return to the READY prompt.
6. Using the key, highlight Add and then press the
GREEN button.
7. Your terminal will automatically allocate the next
available Waiter ID. Key in the text/name description and
press the GREEN button (this field is limited to 10
characters).
(Please refer to Section 5, 'Entering Letters' of this guide for instructions on how to enter letters).
A total of 99 waiters can be added.
Deleting a Waiter ID
Follow steps 1 to 5 above and select DELETE from the WAITER SETUP menu, now proceed as
follows:
1. Key in the Waiter ID code that is to be deleted and
then press the GREEN button.
2. If you want to proceed to delete the Waiter, press the
GREEN button.
If not, press the YELLOW button.
Changing a Waiter ID
Follow steps 1 to 5 of Section 34 (Adding an Individual Waiter ID) and select Change Name from
the WAITER SETUP menu. Now proceed as follows:
SYSTEM MENU
Totals
Print Function Codes
Select Function
EFT
Waiter Setup?
Enter=YES
WAITER SETUP
Add
Delete
Print
Change Name
Delete All
Create Defaults
ADD Waiter
Key in Waiter's Name
aaaaaaaaaa
and then press ENTER
DELETE Waiter
Key in Code to Delete
and then press ENTER
DELETE Waiter nn
<name>
Enter=YES
Clear=NO
Code nn
nn
Clear=NO
Page 31