Ingenico iCT200 Series User Manual page 23

4. You may be asked to enter the start date or issue
number from the card. Enter them as they appear on the
card and press the GREEN button.
5. If the customer is present, press the GREEN button. If
this is a mail order transaction, press the YELLOW button
and proceed from step 9 below.
6. If not entered earlier in the process, key in the amount
of the transaction and press the GREEN button.
The terminal will now dial for authorisation. The
authorisation code will be displayed. Press the GREEN
button.
7. A receipt will now be printed. Obtain the customer's
signature. If the signature is OK, press the GREEN
button. If it is not, press the YELLOW button and the
transaction will be voided.
8. The signed receipt should be kept for your records.
The terminal will now print a receipt for the customer.
Pass the receipt to the customer and the transaction is
complete.
9. If this is a mail order transaction, the YELLOW button
will be pressed when asked if the customer is present.
If not entered earlier in the process, key in the amount of
the transaction and press the GREEN button.
IF YOUR TERMINAL IS CONFIGURED FOR CSC/AVS (A CARDHOLDER VERIFICATION
SERVICE) PROCEED AS FOLLOWS:
If you see this prompt, key in the 3 digit security code,
which can be found on the signature strip on the back of
the customer's card. Now press the GREEN button.
PLEASE NOTE: The security code for American Express
cards is a four digit code and can be found on the front of
the card.
Page 22
<transaction type>
Key start date MMYY
and then press ENTER
<transaction type>
Key in issue number
and then press ENTER
<transaction type>
Is customer present?
Enter=YES Clear=NO
<transaction type>
Key in Amount:
and then press ENTER
SALE
Signature OK?
Enter=YES Clear=NO
<transaction type>
Is customer present?
Enter=YES Clear=NO
<transaction type>
Key in Security Code:
and then press ENTER
0.00