Figure 3.14 Network Setting > Ip Setting - Advantech EKI-1242 Series User Manual

The following figure displays the menu as found in the EKI-1242EIMS/EKI-
1242IEIMS.
Figure 3.14 Network Setting > IP Setting
The following table describes the items in the previous figure.
Item Description
Modbus/TCP IP Address Setting
Mode Click the drop-down menu to select the IP address setting mode:
Static address, or DHCP client.
IP Address Enter a value to specify the IP address of the interface. The default is
192.168.1.1.
Subnet Mask Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Gateway Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
Modbus/TCP and Check the option to use same IP address setting on Modbus/TCP and
EtherNet/IP interface EtherNet/IP interface. In this mode, the Ethernet ports of Modbus/TCP
use the same IP and EtherNet/IP are bridged, so the traffic can be forwarded between
address setting these interfaces.
Unchecked the option to use two different IP subnet on Modbus/TCP
and EtherNet/IP interface. In this mode, the Ethernet ports of Modbus/
TCP and EtherNet/IP are not bridged, so the traffic can't be forwarded
between these interfaces.
EtherNet/IP IP Address Setting
Mode Click the drop-down menu to select the IP Address Setting mode:
Static address, or DHCP client.
39 EKI-1242 Series User Manual