Microsd Card Installation; Installing A Microsd Card; Figure 2.9 Removing The Component Cover Screw; Figure 2.10 Opening The Component Cover - Advantech EKI-1242 Series User Manual

2.6

MicroSD Card Installation

The EKI-1242 Series provides an easy way to backup, restore, and deploy
configuration settings. The fieldbus gateway provides a microSD card slot to support
simple means to manage system configuration settings.
Only microSD cards with the FAT32 or exFAT file systems are supported.
2.6.1

Installing a MicroSD Card

1. Before continuing, make sure the file system on the microSD card is set to
FAT32 or exFAT. If necessary, format the microSD card and then continue with
the procedure.
2. Remove the screw securing the component cover.
3. Open the component cover.
4. The microSD card has a beveled edge. Align the microSD card with the slot
making sure the card is aligned with the groove. If there is any resistance,
remove the card and re-align it to the slot.
5. Insert the microSD card and press it in until an audible click sounds.

Figure 2.9 Removing the Component Cover Screw

Figure 2.10 Opening the Component Cover

Figure 2.11 Installing the MicroSD Card

21 EKI-1242 Series User Manual