Table of Contents
Advertisement
2.
Plug the lockable screw into the lockable hole on UNO.
3.
Plug in the USB connector, secure the USB cable through the lockable stopper,
and fix the position of each lockable stopper with 2 lockable nuts.
4.
Adjust the lockable stopper to fit with the cable dimensions and length.
3.8
Remote Power & Reset Settings
UNO-410 supports remote power & reset functions through DI connector with the
switch setting (SW8) on the motherboard. The default setting is for DI6/DI7 function-
ality. If you want to configure UNO-410 for remote control functions, configure SW8-
Bit 2 to "on", then DI6 can be used for remote power settings, and DI7 can be used
for remote reset setting.
Table 3.1: Remote Power/On & Reset Settings
SW8 Default
Description
DI function for DI6/DI7(Default)
Remote Setting Function
3.9
BIOS Setting
With the BIOS Setup program, you can modify BIOS settings and control the special
features of your computer. The Setup program uses a number of menus for making
changes and turning special features on or off.
Press the "ESC" key upon the first boot up to enter the BIOS setup screen, after then,
press the "Del" key during the Power On Self Test (POST) process to enter the BIOS
setup screen, otherwise the system will continue the POST process.
(Please refer to User Manual- Appendix A.11/ A.12 for more settings.)
Instruction
Bit 2 off
Bit 2 on
37
SW8
UNO-410 User Manual
Advertisement
Table of Contents
