Mapping Overview - Advantech EKI-1242 Series User Manual

3.5.6

Mapping Overview

The Mapping Overview function allows the viewing of data between Modbus RTU/
TCP to PROFINET Slot, EtherNet/IP I/O, EtherCAT PDI/PDO, BACnet/IP or BACnet/
MSTP.
To access this page, click Protocol Setting > Mapping Overview.
The following tables are only available for EKI-1242BNMS/EKI-1242IBNMS.
The ensuing table for Transaction table settings is for reference only: Name,

Quantity, and Access.
The ensuing table for BACnet Object Mapping - AI table settings is for

reference only: Object identifier, Device name, Address and Object name.
The ensuing table for BACnet Object Mapping - AO table settings is for

reference only: Object identifier, Device name, Address and Object name.
The ensuing table for BACnet Object Mapping - BI table settings is for

reference only: Object identifier, Device name, Address and Object name.
The ensuing table for BACnet Object Mapping - BO table settings is for

reference only: Object identifier, Device name, Address and Object name.
The following tables are available for EKI-1242ECMS/EKI-1242IECMS only.
The ensuing table for Input Mapping Overview table settings is for reference

only: Input Data Byte buffer view, Input Data Name, Input Data Function Code,
Input Data Size (Byte) and Input Data Byte range.
The ensuing table for Output Mapping Overview table settings is for reference

only: Output Data Byte buffer view, Output Data Name, Output Data Function
Code, Output Data Size (Byte) and Output Data Byte range.
The ensuing table for Gateway table settings is for reference only: Status,

Control and Exceptions.
The ensuing table for Transaction table settings is for reference only: Name,

Index, Bytes and Access.
The following tables are only available for EKI-1242EIMS/EKI-1242IEIMS.
The ensuing table for Input Mapping Overview table settings is for reference

only: Input Data Byte buffer view, Master Name, Master Function Code, Master
Size (Byte) and Master Byte range.
The ensuing table for Output Mapping Overview table settings is for reference

only: Output Data Byte buffer view, Adapter Name, Adapter Function Code,
Adapter Size (Byte) and Adapter Byte range.
The ensuing table for Transaction table settings is for reference only: Name,

Quantity, Class, Instance, Attribute and Access.
The following tables are only available for EKI-1242PNMS/EKI-1242IPNMS.
The ensuing table for PROFINET I/O table settings is for reference only: Slot,

Transaction Name, In Slot Range(bytes), Input Word and Output Word.
The ensuing table for Modbus Client table settings is for reference only: Name,

FC, Data Swap, Scan Time, Response Timeout, UID, Read/Write Starting
Address, Quantity and When PROFINET doesn't exchange I/O.
EKI-1242 Series User Manual 48