Network Setting; Ip Setting; Figure 3.7 Network Setting > Ip Setting - Advantech EKI-1221IEIMB User Manual

3.4

Network Setting

3.4.1

IP Setting

The IP Setting menu allows you to select a static or DHCP network configuration.
The Static displays the configurable settings for the static option.
To access this page, click Network Setting > IP Setting.
The following table describes the items in the previous figure.
Item
Modbus/TCP IP Address Setting
Mode
IP Address
Subnet Mask
Gateway
Modbus/TCP and
EtherNet/IP interface
use the same IP
address setting
(EKI-1221IEIMB only)
EtherNet/IP IP Address Setting (EKI-1221IEIMB only)
Mode
Figure 3.7 Network Setting > IP Setting
Description
Click the drop-down menu to select the IP address setting mode:
Static address, or DHCP client.
Enter a value to specify the IP address of the interface. The default
is 192.168.1.1.
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
Check the option to use same IP address setting for Modbus/TCP
and EtherNet/IP. Use two different IP subnet when the option is
unchecked.
Click the drop-down menu to select the IP Address Setting mode:
Static address, or DHCP client.
22 EKI-1221IEIMB | PNMB User Manual