Protocol Setting; Bacnet Setting; Figure 3.17 Serial Settings > Port 1; Figure 3.18 Protocol Setting > Bacnet Setting - Advantech EKI-1242 Series User Manual

The following figure displays the menu as found in the EKI-1242BNMS/EKI-
1242IBNMS port 1 (BACnet).
The following table describes the items in the previous figure.
Item
Baud Rate
Submit
3.5

Protocol Setting

3.5.1

BACnet Setting

The BACnet Setting page is only available for EKI-1242BNMS/EKI-1242IBNMS.
To access this page, click Protocol Setting > BACnet Setting.
The following table describes the items in the previous figure.
Item
Device Status/
Control Word in AI[0]/
AO[0]
BACnet Device
Name
Device Identifier
Mode
Max. Masters
EKI-1242 Series User Manual
Figure 3.17 Serial Settings > Port 1
Description
Click the drop-down menu to specify the baud rate. The value should
conform to the current transmission speeds of connected devices
when setting the baud rate.
Click Submit to save the values and update the screen.
Figure 3.18 Protocol Setting > BACnet Setting
Description
When enabled, Device Status/Control Word should be in BACnet
object AI[0]/AO[0]. Default value is Disabled.
Enter the name of the BACnet device.
Enter the value to specify the device identifier.
Click the drop-down menu to select the BACnet mode: IP or MSTP.
Available under MSTP mode. Enter the variable defining the
maximum number of masters.
42