Utilizing A Microsd Card; Figure 2.12 Closing The Component Cover; Figure 2.13 Installing The Component Cover Screw - Advantech EKI-1242 Series User Manual

6. Close the component cover.
7. Secure the component cover with the provided screw.
2.6.2

Utilizing a MicroSD Card

1. The device includes a microSD port to provide easy functionality to backup and
deployment operations. The following information describes the supported uses
when a microSD card (FAT32 or exFAT) is installed in the device.
Further information see "Backup Manager" on page 49 and "Upgrade Manager"
on page 50.
2. The following functions are available:
– Deployment management:
– Reset configuration to factory default and power off.
– Insert a microSD card with a valid configuration file.
– Power on the device.
– The device uses the valid configuration settings in the microSD card.
– Backup management:
– Device setting is not factory default.
– Enable Automatically Backup, see "Backup Manager" on page 49.
– Power off the device and insert a microSD card.
– Power on the device. The device's current configuration settings are saved to
the microSD card.
2.6.2.1 MicroSD Support
In the event of possible function errors, see the following information:
1. Check that the microSD card file system is FAT32 or exFAT.
2. Check that the microSD card has at least 20 Mbytes of free space.
3. Check that the microSD card is not write-protected.
4. Check that the file system is not corrupted.
5. Check that the microSD card is not damaged.
If any of the events occur, the fieldbus gateway halts operation and the status LED
begins flashing.
EKI-1242 Series User Manual

Figure 2.12 Closing the Component Cover

Figure 2.13 Installing the Component Cover Screw

22