History Record - INFOSEC UPS SYSTEM ModT User Manual

Warning! EEPROM Fail
Warning! Fan Lock
Warning! Line Phase Error
Warning! Bypass Phase Error
Warning! N Loss
Warning! Internal Initial Fail
Warning! Comm Syn Signal Fail
Warning! Comm. TRIG0 Fail
Warning! Redundancy Set Fail
Warning! Parallel Sys Config. Wrong
Warning! Maintenance Bypass
Warning! Battery Age Alert
Warning! Parallel Rack Cable Loosen
Warning! Parallel Rack Config. Wrong
Warning! Parallel Firmware Error
Warning! Battery Voltage Low
Warning! ID Conflict
Pre-Alarm! Line Voltage Fail
Pre-Alarm! Line Voltage Normal
Pre-Alarm! Line Frequency Unstable
Pre-Alarm! Line Frequency Normal
Pre-Alarm! Over Load
Pre-Alarm! Load Normal
Pre-Alarm! Load Unbalance

4.4 History Record

Table 4-13: Important setting changed
Item
No.
1 Setup! Model Name
3 Setup! Language
5 Setup! Adjust Time
7 Setup! System Installed Date
9 Setup! System Last Maintain Date
11 Setup! Battery Installed Date
13 Setup! Battery Last Maintain Date
15 Setup! Change Password
17 Setup! Baud Rate
19 Setup! Audible Alarm
21 Setup! Factory Reset
23 Setup! EEPROM Reset
25 Setup! EPO Function
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 04 17 AA 59 201 06
EEPROM operation error
As stated.
As stated.
As stated.
Neutral loss
As stated.
Communicate Synchronization Signal Fail
Communicate Trigger signal fault
As stated.
Parallel System Configure error
Enter maintenance
Battery Life expiration
As stated.
Parallel Rack Configure error
Power module parallel firmware error
Battery voltage is too low.
Power module ID conflict.
Line voltage over range
Line voltage recovered to normal
Line frequency over range
Line frequency recovered to normal
Output Load over range
Output Load recovered to normal
Output Load unbalance
Description
Item
No.
Setup! Turn On Password
2
4 Setup! Change Turn On Password
6 Setup! Nominal Power Display
8 Setup! Output Voltage
10 Setup! Bypass Voltage Range
12 Setup! Bypass Frequency Range
14 Setup! Converter Mode
16 Setup! ECO Mode
18 Setup! Bypass Mode
20 Setup! Auto-Restart
22 Setup! Cold Start
24 Setup! Battery Mode Delay Time
26 Setup! Shutdown Restore Time
Description
81