Select Audio Jingle for Good Read Event
Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep or Jingle and/or LED)
upon successfully reading a bar code. Choices are:
•
•
•
NOTE
DEFAULT
$CBPIN01
Indicate Good Read = After Transmit
Product Reference Guide
Good Read = Indicate after decode
Good Read = Indicate after transmit
Good Read = Indicate after CTS goes inactive, then activ
This option, which uses CTS, is only valid for RS-232 interfaces.
Enter/Exit Programming Mode
e
$CBPIN00
Indicate Good Read = After Decode
$CBPIN02
Indicate Good Read = After CTS Goes Inactive, Then
Active
73