Msi Set Length 2 - Datalogic Cobalto CO5330 Product Reference Manual

MSI

MSI Set Length 2

This feature specifies one of the bar code lengths for
maximum label length if in
Length
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length). See
instructions.
$CMSL2
Select MSI Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Variable Length
Mode. Length includes the bar code's check, data, and full-ASCII shift characters. The
"Set Length 2"
DEFAULT
MSI Length Control
Mode, or the second fixed length if in
on page 241 for more detailed programming
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
. Length 2 is the
Fixed
Appendix D,
~
CANCEL
185