Plessey Set Length 1 - Datalogic Cobalto CO5330 Product Reference Manual

Enter/Exit Programming Mode

Plessey Set Length 1

This feature specifies one of the bar code lengths for
minimum label length if in
Mode. Length includes the bar code's data characters only. The length can be set from 01 to 50
characters.
Table 4
detailed instructions on setting this feature.
Table 4. Plessey Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to
abort and not save the entry string. You can then
start again at the beginning.
212
Variable Length
provides some examples for setting Length 1. See
01 Character
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT Plessey LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Plessey Length Control
Mode, or the first fixed length if in
"Set Length 1"
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
01 = Length 1 is 1 Character
Plessey
. Length 1 is the
Fixed Length
on page 239 for
50 Characters
'5' AND '0'
CANCEL
Cobalto™ CO5300 Scanner