Timeout: Laser Off After Single Line Scan - Datalogic Cobalto CO5330 Product Reference Manual

Timeout: Laser Off After Single Line Scan

Timeout: Laser Off After Single Line Scan
As described earlier (see
cause the scanner to enter single scan line operation, allowing the scanner to more easily
target and read truncated bar codes, or aim at a single label from amongst multiple bar codes.
This timeout defines the duration of time before the laser is turned off after the button
(trigger) is released.
DEFAULT
$CLOTM01
Laser Off After Single Line Timeout = Off after
1 Second
$CLOTM03
Laser Off After Single Line Timeout = Off after
3 Seconds
$CLOTM08
Laser Off After Single Line Timeout = Off after
8 Seconds
Product Reference Guide
Capacitive Touch Button on page 2



Enter/Exit Programming Mode
), pressing the top button can
$CLOTM00
Laser Off After Single Line Timeout = Don't turn off
the Laser
$CLOTM02
Laser Off After Single Line Timeout = Off after
2 Seconds
$CLOTM05
Laser Off After Single Line Timeout = Off after
5 Seconds



65