Industrial 2 Of 5 Set Length 1 - Datalogic Cobalto CO5330 Product Reference Manual

Industrial 2 of 5

Industrial 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Length 1 is the minimum label length if in
Fixed Length
The length can be set from 1 to 50 characters. See
detailed programming instructions.
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Mode. Length includes the bar code's data characters only.
$CU2L1
DEFAULT
Industrial 2 of 5 Length Control
Variable Length
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
01 = Length 1 is 1 Character
Enter/Exit Programming Mode
Mode, or the first fixed length if in
on page 239 for more
Appendix D,
~
CANCEL
.
175