Configuration Using Bar Codes; Configuration Parameters - Datalogic Cobalto CO5330 Product Reference Manual

This and following sections provide programming bar codes to configure your scanner by
changing the default settings. For details about additional methods of programming, see
Customizing Configuration Settings" on page 11
"

Configuration Parameters

Once the scanner is set up, you can change the default parameters to meet your application
needs. Refer to "
configuration in order to set the default values and select the interface for your application.
The following configuration parameters are divided into logical groups, making it easy to find
the desired function based on its reference group.
Interface Configuration:
•
•
•
•
Parameters common to all interface applications:
•
•
•
Symbology-specific parameters:
"Symbologies" on page 79
programming bar codes necessary for configuring these features.
Product Reference Guide

Configuration Using Bar Codes

You must first enable your scanner to read bar codes in order to use this
section. If you have not done this, go to
complete the appropriate procedure.
NOTE
Resetting the Product Configuration to Defaults" on page 13
"RS-232 ONLY Interface" on page 19
"RS-232/USB-COM Interfaces" on page 23
"Keyboard Interface" on page 33
"USB-OEM Interface" on page 43
Global Prefix/Suffix" on page 46
"
Data Format" on page 45
"
scanned data output.
Reading Parameters" on page 57
"
status functioning.
defines options for all symbologies and provides the
.
offers advanced configuration options for customization of
control various operating modes and indicators
Chapter 3
Setup, starting on page 5
for initial
and
15