Datalogic PowerScan M8500 Quick Reference Manual

Datalogic powerscan m8500 handheld area imager, bar code reader with datalogic’s star cordless system
Hide thumbs Also See for PowerScan M8500:

Advertisement

PowerScan™ M8500 Readers
Industrial Handheld Area Imager
Bar Code Reader with
Datalogic's STAR Cordless System™
Quick Reference Guide

Advertisement

Table of Contents
loading

Summary of Contents for Datalogic PowerScan M8500

  • Page 1 PowerScan™ M8500 Readers Industrial Handheld Area Imager Bar Code Reader with Datalogic’s STAR Cordless System™ Quick Reference Guide...
  • Page 2 An Unpublished Work - All rights reserved. No part of the contents of this docu- mentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”). Owners of Data-...
  • Page 3: Table Of Contents

    Operating Test ....................16 Technical Features ..................17 Services and Support ................22 Regulatory Information ................23 Compliance ..................23 FCC Compliance .................23 Radio Compliance................23 IC (Industry Canada)................23 Power Supply ..................24 Laser Safety ..................28 WEEE Compliance................32 Datalogic ADC Limited Factory Warranty .........33 Numeric Table .....................36...
  • Page 4 NOTES...
  • Page 5: Powerscan™ M8500 Family

    USA Driver elements from USA Driver License PDF417 bar codes. This feature License Parsing can be enabled using either Datalogic Aladdin™ or the bar codes in the USA Driver License Parsing Quick Reference Guide (QRG), available on the Datalogic website.
  • Page 6: Using The Powerscan™ Pm8500 Family

    Using the PowerScan™ PM8500 Family Using the PowerScan™ PM8500 Family The PowerScan™ PM8500 normally functions by capturing and decoding codes. The PowerScan™ PM8500 reader uses an intelligent aiming system. By pulling the trigger, the aiming system indicates a field of view, which should be positioned over the code: Aiming System When you pull the trigger, a red beam illuminates the code.
  • Page 7: Indicators

    Indicators Indicators LED Indicators The PowerScan™ PM8500 family uses green LED indicators to signal the follow- ing reader functions: STATUS BEHAVIOR Power ON At power-on, the LEDs blink briefly, then light up for 2 seconds to signal the power supply is present. Normal Function The LED lights up after a good decoding and will switch off only at the next trigger press.
  • Page 8: Charging The Batteries

    Charging the Batteries Charging the Batteries Once the BC-80X0/C-8000 is powered, you can charge the reader's batteries. Place the PowerScan™ M8500 into the BC-80X0 cradle or the C-8000 battery charger. The "Reader" LED on the cradle/battery charger turns red. The battery is completely charged when the "Reader" LED on the cradle/battery charger turns green.
  • Page 9 Always charge the battery at 32° – 104°F (0° - 40°C) temperature range. Use only the authorized power supplies, battery pack, chargers, and docks supplied by your Datalogic reseller. The use of any other power supplies can damage the device and void your warranty.
  • Page 10: Setup

    Setup Setup PowerScan™ M8500/BC-80X0 Point-to Point Configuration Connect a BC-80X0 cradle to the Host. For installation and connection information see the BC-80X0 Quick Reference Manual. Charge the PowerScan™ M8500 battery using an BC-80X0 or the C-8000 charger as described in this Quick Reference manual. A full charge takes 4 hours if using an external power supply;...
  • Page 11: Powerscan™ M8500 Configuration

    PowerScan™ M8500 Configuration PowerScan™ M8500 Configuration PowerScan™ M8500/BC-80X0 Point-to-Point Setup A rapid configuration procedure has been devised for point-to-point applications where a single reader is associated exclusively with its own BC-80X0 base station and where it is not necessary to set the Date and Time parameters. A special pre-printed bind-address label provided in the BC-80X0 base station package can be used to bind the PowerScan™...
  • Page 12: Powerscan™ M8500/Bc-80X0 Stand Alone Setup

    PowerScan™ M8500 Configuration PowerScan™ M8500/BC-80X0 Stand Alone Setup When the BC-80X0 cradle is connected and powered, configure the PowerScan™ M8500 by reading the following codes in the given sequence and follow the instruc- tions. For the numeric code selection of steps 3, 4, and 5 use the table at the end of this Quick Reference Restore PowerScan™...
  • Page 13 PowerScan™ M8500 Configuration four digits for Hours and Minutes (HHMM). Set Radio Address four digits for the PowerScan™ M8500 Address (from 0000 to 1999). All readers used in the same area must have different addresses. Exit and Save Configuration Read the Bind code to pair the PowerScan™ M8500 to the BC-80X0 cradle. The reader is dedicated to the cradle.
  • Page 14 PowerScan™ M8500 Configuration Green LED Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick Reference”. END of procedure. YOUR READER IS NOW READY TO READ CODES. PowerScan™ M8500...
  • Page 15: Using Multiple Readers With Same Cradle

    PowerScan™ M8500 Configuration Using Multiple Readers with Same Cradle If you want to use several readers associated with the same cradle, you must first Bind the cradle with one of the readers (see previously described configuration procedure). Successive readers can be associated with the same cradle by following the con- figuration procedure substituting the Bind command with Join.
  • Page 16: Powerscan™ M8500/Star-System™ Setup

    PowerScan™ M8500 Configuration PowerScan™ M8500/STAR-SYSTEM™ Setup The following procedure allows configuring a PowerScan™ M8500 reader to communicate with various STAR-System™ devices such as Stargate™ RF base stations: Restore PowerScan™ M8500 Default Enter Configuration Set Date six digits for Day, Month and Year (DDMMYY). Set Time four digits for Hours and Minutes (HHMM).
  • Page 17 PowerScan™ M8500 Configuration Set the connection according to the length of the codes to be read: Code Length 240 Characters Code Length 240 Characters (not for systems with BC-80X0 as Master) Set Radio Address four digits from the Numeric Table for the PowerScan™ M8500 Address (from 0000 to 1999).
  • Page 18 PowerScan™ M8500 Configuration Set Last STAR-System™ Address four digits from the Numeric Table in the range 0000 to 1999 Whenever the system is composed of a single base station, the first and last base station addresses (steps 7 and 8) must have the same value.
  • Page 19: Default Configuration

    Default Configuration Default Configuration DATA FORMAT – Symbology Dependent Parameters symbology specific format = select all, no headers, no terminators, symbology character substitution disabled, symbology character deletion disabled DATA FORMAT – Concatenation Concatenation disabled, 2 EAN/UPC codes concatenated, Set First Concatenated Code Length 000 = any length, Set Second Concatenated Code Length 000 = any length, Set Third Concatenated Code Length 000 = any length, Set Fourth Concatenated Code Length 000 = any length, Concatenation with Intercode Delay disabled, Concatenation Timeout 10...
  • Page 20: Operating Test

    Operating Test Operating Test EAN-13 Code 39 (Standard) 1 234567 000992 Code 128 PDF417 Data Matrix (Normal) PowerScan™ M8500...
  • Page 21: Technical Features

    Technical Features Technical Features PowerScan™ M8500 Family Common Features Electrical Features Battery Type 2150 Li-Ion battery pack Time of recharge max. 4 hours with external power supply max. 10 hours with Host power Operating autonomy 30,000 reads (typical) (continuous reading) Display LCD 4 lines x 16 chars (Only available with some...
  • Page 22 Technical Features PowerScan™ M8500 Family Common Features (continued) Optical Features Sensor 1280 x 1024 pixel element, 2D CMOS Array Illuminator LED array Wavelength In the range 630 ~ 670 nm LED Safety Class Class 1 to EN 60825-1 Aiming System Visible Laser Diode Wavelength 650 nm...
  • Page 23 Technical Features PowerScan™ M8500™ Optical Features Focus distance 140 mm Field of view 28°(H )x 23°(V) Horizontal field of view at 0.52d + 15 distance (d) in mm Vertical field of view at distance 0.42d + 12 (d) in mm Max Resolution Linear codes - mm PDF417 - mm...
  • Page 24 Technical Features PowerScan™ M8500™ HD Optical Features Focus distance 65 mm Field of view 27° (H) x 22° (V) Horizontal field of view at 0.50d + 13 distance (d) in mm Vertical field of view at distance 0.40d + 10 (d) in mm Max Resolution Linear codes - mm...
  • Page 25 Technical Features PowerScan™ M8500™ WA Optical Features Focus distance 110 mm Field of view 57° x 46° Horizontal field of view at 1.09d + 38 distance (d) in mm Vertical field of view at distance 0.85d + 30 (d) in mm Max Resolution Linear codes - mm PDF 417 –...
  • Page 26: Services And Support

    Services and Support Services and Support Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com and click on the links indicated for further information including: Products Search through the links to arrive at your product page where you can download specific Manuals and Software &...
  • Page 27: Regulatory Information

    FCC Compliance Modifications or changes to this equipment without the express written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation.
  • Page 28: Power Supply

    Regulatory Information Power Supply Argentina Statement Características de la fuente de alimentación eléctrica. 100 - 240 Vca Entrada: Atencíon 400mA min 50/60 Hz 12VDC, 1500mA máx Salida: (-)Negativo al centro Utilice en su red solo fuentes certificadas en Argentina. El uso de fuentes de alimentación no compatibles puede resultar en riesgo de incendio o de choque eléctrico para el usuario.
  • Page 29 Regulatory Information Anatel (Brazil conformity) Modelo PowerScan M8500 BC8060 and BC8030 (carregadores) 0730-10-4727 (01)07898916345031 “Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.”...
  • Page 30 Regulatory Information China RoHS Table of Restricted Elements (Scanner) PowerScan™ M8500...
  • Page 31 Regulatory Information China RoHS Table of Restricted Elements (Base) Quick Reference Guide...
  • Page 32: Laser Safety

    Regulatory Information Laser Safety The PowerScan™ PM8500 handheld reader is a Class 1 LED product regarding its Illuminator and a Class 2 laser product regarding its Aiming System. LED Illuminator The use of an illuminator in the PowerScan™ PM8500 handheld reader is a Class 1 LED product: ILLUMINATORE LED CLASSE 1 AUSLEUCHTER LED KLASSE 1...
  • Page 33 Regulatory Information ENGLISH The following information is provided to comply with the rules imposed by inter- national authorities and refers to the correct use of your terminal. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN 60825-1 at the date of manufacture.
  • Page 34 Regulatory Information NORM FÜR DIE LASERSICHERHEIT Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH 21 CFR 1040 Normen für die Lasersicherheit. Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und War- tungs-Arbeiten zu öffnen. Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschreiben werden, können ein gefährliches Laserlicht verursachen.
  • Page 35 Regulatory Information No es necesario abrir el aparato para la instalación, la utilización o la manutención. La utilización de procedimientos o regulaciones diferentes de aquellas describidas en la documentación puede causar una exposición peligrosa a la luz láser visible. ATENCIÓN El aparato utiliza un diodo láser a baja potencia.
  • Page 36: Weee Compliance

    Waste Electrical and Electronic Equipment (WEEE) Statement English For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.datalogic.com. Italian Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www.datalogic.com.
  • Page 37: Datalogic Adc Limited Factory Warranty

    Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located.
  • Page 38: Warranty Exclusions

    Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic. PowerScan™ M8500...
  • Page 39 OF THE POSSIBILITY OF SUCH DAMAGES. Risk of Loss Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of specific written instructions for the return of product to Cus- tomer, Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.
  • Page 40: Numeric Table

    Numeric Table Numeric Table ANFOGIFKDNGNENEIEPANHOGOCK ANEPGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFHBHIK AHPNIBAMDKEOFMHMLJALEHEEIK AKCBPJCJGIIJCMCFGPOFMJLDJK AKCBPJCJGIIJCMCEHPLFIKNHNK AEFBJLBGMHPKNIFGJCGBBDNHGK AEFBJLBGMHPKMKGPIEMNLKLEGK AAPHBAJJDEBJCDJAGBDLGHNFHK AAPHBAJIDGFBMBLDDDNIEPNNFK AFKEBJJPCPKMAJNAMBKKKCFJKK AEKEBJMNMOKOIOPNEFCOIJJLJK DLDLLLDDDLLLLLLDLLDDDLDLLL DLDLLLDDLDDLLLLDDDLDDLDLLL ANEOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKEFGHIK AKCBPJCJGIIJCMCEGMILJPPDNK AEFBJLBGMHPKMKEKGKAMOGNEGK AAPHBAJJDEFNLJHLIGJCCKKLDK AELEBMKKGLEGCCHPLDIKICJLLK DDLLLLDDDLDLLLLDLLLDDLDLLL AMFPGIFKDNGNENEIEPANHOGOCK AMFOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKECHEIK AHPNIBAMDKEOFMHMLJALEAFHIK AKCBPJCJGIIJCMCFGKLNLGILJK AKCBPJCJGIIJCMCFHJIDKDKPJK AEFBJLBGMHPLNJDDOKGPBMIGGK AEFBJLBGMHPLNJBGAEKOEAOGGK AAPHBAJIDCBNPBJGGNKINPEPFK AAPHBAJJDABBIJFONIOCLKDJDK AGLEBMONMCIOAPCIABBMOFHJJK AGKEBJIKGHGGKDKKPHLIOOHJLK DLLLLLDDLLLLLLLDLLLDDLDLDL DDDLLLDDDDLLLLLDDDLDDLDLDL PowerScan™ M8500...
  • Page 41 Numeric Table AMEPGIFKDNGNENEIEPANHOGOCK AMEOGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFAAEIK AHPNIBAMDKEOFMHMLJALFCCHIK AKCBPJCJGIIJCMCEGJNDOAMLNK AKCBPJCJGIIJCMCEHKONPFOPNK AEFBJLBGMHPLMLCPBCACOJIFGK AEFBJLBGMHPLMLAKPMMDLFOFGK AAPHBAJIDCFJGLHNIKABJCDBBK AAPHBAJJDAFFBDLFDPELPHEHHK AHKEBJNIIGGECEIHHDDMMFLLIK AHLEBMLPCDIMIIAFIFJIMOLLKK DDDLLLDDLLDLLLLDLLDDDLDLDL DLLLLLDDDDDLLLLDDDDDDLDLDL ANFNGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJAKFCHFIK AKCBPJCJGIIJCMCEHJLAGJEHJK AEFBJLBGMHPKMMHJBODNLMGFGK AAPHBAJIDFBCOHNDCJGDNMAPDK AHKEBNOMACIOMCLCEECKCIFKLK DDLLLLDDDDLLLLLDDLLDDLDLDL ANFMGIFKDNGNENEIEPANHOGOCK ANENGIFKDNGNENEIEPANHOGOCK AHPNIBAMDKEOFMHMLJALFAFGIK AHPNIBAMDKEOFMHMLJAKEAAFIK AKCBPJCJGIIJCMCEGKIOHMGDJK AKCBPJCJGIIJCMCFHKNODPAHNK AEFBJLBGMHPKMMFMPAPMOAAFGK AEFBJLBGMHPKNOGFOGFAEJGGGK AAPHBAJJDHBOJPBLJMCJLJHJFK AAPHBAJIDFFGHNDIMOMKJBHBHK AHLEBIILKHGGGODALCIOCDFKJK AGLEBINJEGGEOJBNDGAKAIJIKK DLDLLLDDLLLLLLLDLDLDDLDLDL DLDLLLDDDDDLLLLDDLDDDLDLDL Quick Reference Guide...
  • Page 42 Numeric Table NOTES PowerScan™ M8500...
  • Page 43: Declaration Of Conformity

    La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per: This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for: Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour: Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt...
  • Page 44 ©2009-2013 Datalogic, Inc. • All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Datalogic ADC, Inc. 959 Terry Street Eugene OR 97402 Telephone: (1) 541-683-5700...

Table of Contents