C
Hold
ON OFF
Relative
Configure
Show Info
ON OFF
Auto Range
Switch Range Select manual range mode, press to switch range
DMM Information Window
The Multimeter Information Window is displayed on the top right of the screen.
9
8
7
Description
1. Manual/Auto range indicators, MANUAL refers to the measuring range in
manual operation mode and AUTO refers to the measuring range in automatic
operation mode.
2. Measurement mode indicators:
------ Current measurement
A
------ Voltage measurement
V
------ Resistance
R
------ Diode measurement
------ Continuity test
------ Capacitance
C
3. Range.
4. Measurement display ("OL" is short for overload, indicates the reading
exceeds the display range)
5. Data hold mode is enabled.
6. Multimeter recorder (See
5.Use the Multimeter
Measuring capacitance
Freeze the display during measurement.
When making relative measurements, reading is
the difference between a stored reference value
and the input signal.
Show/Hide the information window
Select auto range mode
1
Figure 5-3 Multimeter Information Window
measurement
measurement
Multimeter Recorder
"
2
3
" on page 99
96
4
5
6
).