Dmm Information Window - Owon TAO 3000 Series Quick Manual

Show Info
ON OFF
Auto Range
Switch Range
Voltage
mV V
(Only for
voltage
measurement)

DMM Information Window

The Multimeter Information Window is displayed on the top right of the screen.
9
8
7
Description
1. Manual/Auto range indicators, MANUAL refers to the measuring range in manual
operation mode and AUTO refers to the measuring range in automatic operation
mode.
2. Measurement mode indicators:
A ------
V ------
R ------
------
------
C ------
3. Range.
4. Measurement display ("OL" is short for overload, indicates the reading exceeds the
display range)
5. Data hold mode is enabled.
5.Use the Multimeter
difference between a stored reference value and the
input signal.
Show/Hide the information window
Select auto range mode
Select manual range mode, press to switch range
Select the Voltage range.
1
Figure 5-3 Multimeter Information Window
Current measurement
Voltage measurement
Resistance measurement
Diode measurement
Continuity test
Capacitance measurement
2 3
30
4
5
6