To Set The Beep; View System Information; To Set The Clock Source - Owon AG4101 User Manual

Burst
Frequency
Count
Period
Phase
Burst Delay
I/O Configuration
I/O
Baud Rate
Parity
IP Address
Port
Gate Way
Others
Source
Signal Output Switch
Sync Signal Output
DC Voltage

To Set the Beep

(1) Press Utility and choose System, press F4
menu.
(2) Press F1 to select Beep.
(3) Press F1 to switch between On/Off. On is to activate the sound when the system
informs you. Off is to deactivate it.

View System Information

(1) Press Utility and choose System, press F4
menu.
(2) Press F2 to select Sys info. You can view the Version and Serial Number.

To Set the Clock Source

The series provide a 20 MHz internal clock source and also accepts external clock source
input from the [20MHz In] connector at the rear panel. It can also output a 20 MHz clock
source from the [20MHz Out] connector for other device to use.
5.Front Panel Operation
Default
1kHz
1 Cycle
1 sec
0°
0ns
Default
GPIB（IEEE－488）
115200 bps
No (8 bits)
192.168.1.99
3000
192.168.1.1
Default
Internal
Off
Off
0V
35
to enter the second page of the
to enter the second page of the