YOKOGAWA WT332E User Manual page 105

Default Values for Integration: dFLt-i
Select this setting to output integrated values. The output settings are as follows:
Output Channel
1 These channels cannot be set.
2 The numbers are used to indicate input elements 1, 2, and 3.
Configuring an Original Output Format
You can specify output items (output functions and elements) for each output channel.
Output Functions (Area A in step 8 in the procedural explanation
for setting the D/A output format)
You can select from the following options.
u (voltage U), i (current I), P (active power P), VA (apparent power S),
VAr (reactive power Q), PF (power factor λ), dEG (phase angle Φ),
uFrq (voltage frequency fU), iFrq (current frequency fI),
uP (peak voltage value Upk), iP (peak current value Ipk),
Ph (sum of watt hours Wp), Ph+ (positive watt hour Wp+), Ph– (negative watt hour Wp–),
Ah (sum of ampere hours q), Ah+ (positive ampere hour* q+), Ah– (negative ampere hour* q-),
MATH (integration), ---- (0 V D/A output; no element is specified)
* For more information about positive and negative ampere hours, see page 5-4 of the User's
Manual, IM WT310E-01EN.
Elements (Area B in step 10 in the procedural explanation for setting the D/A output
format)
Product Name
WT310E or WT310EH 1
WT332E
WT333E
Element number 4 represents Σ.
IM WT310E-02EN
Suffix Code /DA4
Product Name WT310E
WT310EH
ch1 P1
ch2 WP1
ch3 q1
ch4 fU
ch5 1
ch6
ch7
ch8
ch9
ch10
ch11
ch12
Element
1, 3, or 4
1, 2, 3, or 4
5.3 Producing D/A Output
/DA12
WT332E WT333E
P1 P1
- P2
P3 P3
PΣ PΣ
WP1 WP1
- WP2
WP3 WP3
WPΣ WPΣ
q1 q1
- q2
q3 q3
qΣ qΣ
1
2
3
4
5
6
7
App
Index
5-7