Chapter 2 Making Preparations For Measurements; Handling Precautions - YOKOGAWA WT332E User Manual

Chapter 2 Making Preparations for Measurements
2.1

Handling Precautions

Safety Precautions
If you are using this instrument for the first time, make sure to read "Safety Precautions" on pages vi to x.
Do Not Remove the Case
Do not remove the case from the instrument. Some parts of the instrument use high voltages and
are extremely dangerous. For internal inspection and adjustment, contact your nearest YOKOGAWA
dealer.
Unplug If Abnormal Behavior Occurs
If you notice smoke or unusual odors coming from the instrument, immediately turn off the power and
unplug the power cord. Also, turn off the power to any circuits under measurement that are connected
to the input terminals. Then, contact your nearest YOKOGAWA dealer.
Do Not Damage the Power Cord
Nothing should be placed on top of the power cord. The power cord should also be kept away from
any heat sources. When removing the plug from the power outlet, do not pull on the cord. Pull from
the plug. If the power cord is damaged or if you are using the instrument in a location where the power
supply specifications are different, purchase a power cord that matches the specifications of the region
that the instrument will be used in.
Operating Environment and Conditions
This instrument complies with the EMC standard under specific operating environment and operating
conditions. If the installation, wiring, and so on are not appropriate, the compliance conditions of the
EMC standard may not be met. In such cases, the user will be required to take appropriate measures.
General Handling Precautions
Do Not Place Objects on Top of the Instrument
Never stack the instrument or place other instruments or any objects containing water on top of it.
Doing so may damage the instrument.
Keep Electrically Charged Objects Away from the Instrument
Keep electrically charged objects away from the input terminals. They may damage the internal
circuitry.
Unplug during Extended Non-Use
Turn off the power to the circuit under measurement and the instrument and remove the power cord
from the outlet.
IM WT310E-02EN
1
2
3
4
5
6
7
App
Index
2-1